Понеделник, Септември 25, 2017
   
Text Size

FP30/T - FP30/S-T

 

PALLET STRETCH WRAPPING MACHINE WITH OPEN TURNTABLE AND AN AUTOMATIC WORKING CYCLE

 
 
FP30ST  

 

TECHNICAL CHARACTERISTICS

  • TURNTABLE DIAMETER : 1500/1800 mm
  • TURNTABLE ROTATING SPEED : ADJUSTABLE FROM 7 TO 15 r.p.m.
  • MAX. LOAD CAPACITY and MAX. PALLET DIMENSIONS : depending from the machine execution
  • MAX. HEIGHT OF THE FILM ROLL : 500 mm
  • MAX. DIAMETER OF THE FILM ROLL : 300 mm
  • PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
  • FP30/S-T: MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG :
    * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN)
    * WAY-UP WRAPPING ONLY
    * WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
    * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
  • FP30/T: ELECTROMECHANIC CONTROL BOX
  • DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM (ONLY FOR THE FP30/S-T VERSION)
  • SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
  • SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
  • INVERTER CONTROLLING THE PROGRESSIVE START, THE REGULATION OF THE ROTATING SPEED AND THE INDEXED STOPPING POSITION OF THE TURNTABLE
  • ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
  • FILM CARRIAGE WITH BELT TRANSMISSION
  • LOWER SAFETY UNIT FOR THE PROTECTION OF THE FILM CARRIAGE AREA
  • FILM CARRIAGE MOTOR LOCATED INSIDE THE COLUMN
  • TURNTABLE MOTOR COVER
  • SAFETY ARMS WITH PHOTOCELL (FILMA PATENT NO. MI96UOOO255) TO PREVENT ANY ACCIDENT DUE TO THE UN-EXPECTED ENTRY OF THE JACKPALLET INSIDE THE THE TURN-TABLE AREA DURING THE NORMAL WORKING CYCLE
  • MACHINE PREPARED TO BE EQUIPPED WITH THE PNEUMATIC TOP PRESS
  • STANDARD ELECTRIC SETTING : 380 V - 50 cycles - 3phase + neutral
  • TOTAL WEIGHT OF THE MACHINE : 550 kg  

WIDE RANGE OF ACCESSORIES AVAILABLE ON REQUEST

 
 
 

SOME DETAILS OF THE MACHINE AND OF ITS ACCESSORIES


FRIZIONE  REGOLAZIONE DELLA TENSIONE DEL FILM TRAMITE FRENO  ELETTROMAGNETICO
ELECTROMAGNETIC CLUTCH (standard) FOR THE BEST REGULATION OF THE FILM TENSION
FOTOCELLULA DI SICUREZZA
SAFETY PHOTOCELL
CP 130
CP 130
PNEUMATIC TOP PRESS UNIT
FP 30
FP 30/T
ELECTROMECHANIC CONTROL BOX
FP 30-S
FP 30/S-T
ELECTRONIC CONTROL BOX
CP 670/A

CP 670/A (optional)
POWER PRESTRETCH FOR 200% FILM STRETCHING (1 mt = 3 mt)


 

OVERALL DIMENSIONS


PDF Download the PDF catalogue
PDF Download the PDF catalogue